查看特别推荐 >>
24850
CD68 (D4B9C) XP® Rabbit mAb (Alexa Fluor® 488 Conjugate)
抗体偶联物
单克隆抗体
R
Recombinant

CD68 (D4B9C) XP® Rabbit mAb (Alexa Fluor® 488 Conjugate) #24850

Citations (4)
Filter:
  1. IHC
  2. F
Immunohistochemical analysis of paraffin-embedded human colon adenocarcinoma using CD68 (D4B9C) XP® Rabbit mAb (Alexa Fluor® 488 Conjugate) (green) and DAPI #4083 (blue).
Flow cytometric analysis of human periperal blood mononuclear cells co-stained with anti-human CD14 using CD68 (D4B9C) XP® Rabbit mAb (Alexa Fluor® 488 Conjugate) (right) compared to concentration-matched Rabbit (DA1E) mAb IgG XP® Isotype Control (Alexa Fluor® 488 Conjugate) #2975 (left).
To Purchase # 24850S
Cat. # Size Price Inventory
24850S
100 µl  (50 tests)

Supporting Data

REACTIVITY H
SENSITIVITY Endogenous
MW (kDa)
Source/Isotype Rabbit IgG

Application Key:

  • WB-Western Blot
  • IP-Immunoprecipitation
  • IHC-Immunohistochemistry
  • ChIP-Chromatin Immunoprecipitation
  • C&R-CUT&RUN
  • C&T-CUT&Tag
  • DB-Dot Blot
  • eCLIP-eCLIP
  • IF-Immunofluorescence
  • F-Flow Cytometry

Species Cross-Reactivity Key:

  • H-Human
  • M-Mouse
  • R-Rat
  • Hm-Hamster
  • Mk-Monkey
  • Vir-Virus
  • Mi-Mink
  • C-Chicken
  • Dm-D. melanogaster
  • X-Xenopus
  • Z-Zebrafish
  • B-Bovine
  • Dg-Dog
  • Pg-Pig
  • Sc-S. cerevisiae
  • Ce-C. elegans
  • Hr-Horse
  • GP-Guinea Pig
  • Rab-Rabbit
  • All-All Species Expected

Product Description

This Cell Signaling Technology antibody is conjugated to Alexa Fluor® 488 fluorescent dye under optimal conditions. This antibody is expected to exhibit the same species cross-reactivity as the unconjugated CD68 (D4B9C) XP® Rabbit mAb #76437.

Product Usage Information

Application Dilution
Immunohistochemistry (Paraffin) 1:50 - 1:200
Flow Cytometry (Fixed/Permeabilized) 1:50

Storage

Supplied in PBS (pH 7.2), less than 0.1% sodium azide and 2 mg/ml BSA. Store at 4°C. Do not aliquot the antibody. Protect from light. Do not freeze.

Protocol

PRINT

View >Collapse >

Immunohistochemistry (Paraffin)

A. Solutions and Reagents

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. Xylene.
  2. Ethanol, anhydrous denatured, histological grade (100% and 95%).
  3. Deionized water (dH2O).
  4. Wash Buffer:
    1. 1X Tris Buffered Saline with Tween® 20 (TBST): To prepare 1 L 1X TBST, add 100 ml 10X Tris Buffered Saline with Tween® 20 (TBST)(#9997) to 900 ml dH20, mix.
    2. 1X Phosphate Buffered Saline (PBS): To prepare 1L 1X PBS, add 100 mL 10X Wash Buffer, Phosphate Buffered Saline(#12528) to 900 ml dH20, mix.
  5. SignalStain® Antibody Diluent: (#8112)
  6. 1X EDTA Unmasking Solution: To prepare 250 mL of 1X EDTA unmasking solution, dilute 25 ml of SignalStain® EDTA Unmasking Solution (10X) (#14747) with 225 ml of dH2O.
  7. 3% Hydrogen Peroxide: To prepare, add 10 ml 30% H2O2 to 90 ml dH2O.
  8. Blocking Solution: 1X TBST/5% Normal Goat Serum or 1X Animal-Free Blocking Solution.
    1. TBST/5% Normal Goat Serum: to 5 ml 1X TBST, add 250 µl Normal Goat Serum (#5425).
    2. 1X Animal-Free Blocking Solution: to 4 mL of dH2O, add 1 ml of Animal-Free Blocking Solution (5X) (#15019).
  9. Prolong® Gold AntiFade Reagent(#9071), Prolong® Gold AntiFade Reagent with DAPI(#8961).
  10. (optional) TrueBlack® Lipofuscin Autofluorescence Quencher (#92401).

B. Deparaffinization/Rehydration

NOTE: Do not allow slides to dry at any time during this procedure.

  1. Deparaffinize/hydrate sections:
    1. Incubate sections in three washes of xylene for 5 minutes each.
    2. Incubate sections in two washes of 100% ethanol for 10 minutes each.
    3. Incubate sections in two washes of 95% ethanol for 10 minutes each.
  2. Wash sections twice in dH2O for 5 minutes each.

C. Antigen Unmasking

  1. Heat slides submersed in 1X EDTA unmasking solution in a microwave until boiling is initiated; follow with 15 min at sub-boiling temperature (95°-98°). No cooling is necessary.
  2. D. Staining

    1. Wash sections in dH2O three times for 5 minutes each.
    2. Incubate sections in 1X TBST for 5 min.
    3. Block each section with 100-400 µl of preferred blocking solution for 1 hour at room temperature.
    4. Remove blocking solution and add 100-400 µl primary antibody diluted in SignalStain® Antibody Diluent to each section.
    5. Incubate overnight at 4°C.
    6. Rinse three times in 1X PBS for 5 min each protected from light.
      NOTE: See below for optional TrueBlack® Lipofuscin Autofluorescence Quencher protocol.
    7. Coverslip slides with Prolong® Gold Antifade Reagent or Prolong® Gold Antifade Reagent with DAPI.
    8. For best results, allow mountant to cure overnight at room temperature. For long-term storage, store slides flat at 4°C protected from light.

    TrueBlack® Lipofuscin Autofluorescence Quencher protocol

    Following Section D Step 6:

    IMPORTANT: TrueBlack® Lipofuscin Autofluorescence Quencher is not compatible with detergent. Any steps involving detergent must be done before applying TrueBlack® Lipofuscin Autofluorescence Quencher.

    1. Prepare TrueBlack® Lipofuscin Autofluorescence Quencher solution by diluting 1:20 in 70% ethanol. Vortex to mix.
      NOTE: Quenching solution should be made fresh prior to use and discarded if precipitate is visible. We recommend heating the vial of stock solution of TrueBlack® Lipofuscin Autofluorescence Quencher, 20X in DMF to 70°C prior to dilution in order to avoid precipitate formation.
    2. Immediately cover tissue sections with 100 µL - 200 µL of quenching solution for 30 seconds at room temperature.
      IMPORTANT: Do not allow sections to dry out. Sections may tolerate longer incubations (up to 3 minutes) so long as they remain hydrated.
    3. Tap slides on an absorbent towel to collect excess TrueBlack® Lipofuscin Autofluorescence Quencher before transferring to 1X PBS.
    4. Rinse three times in 1X PBS for 5 min each.
    5. Proceed with counterstaining/mounting.

Protocol Id: 2924

Flow Cytometry, Methanol Permeabilization Protocol for Directly Conjugated Antibodies

A. Solutions and Reagents

All reagents required for this protocol may be efficiently purchased together in our Intracellular Flow Cytometry Kit (Methanol) #13593, or individually using the catalog numbers listed below.

NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.

  1. 1X Phosphate Buffered Saline (PBS): To prepare 1 L 1X PBS: add 100 ml 10X PBS (#12528) to 900 ml water mix.
  2. 4% Formaldehyde, Methanol-Free (#47746)
  3. 100% Methanol (#13604): Chill before use
  4. Antibody Dilution Buffer: Purchase ready-to-use Flow Cytometry Antibody Dilution Buffer (#13616), or prepare a 0.5% BSA PBS buffer by dissolving 0.5 g Bovine Serum Albumin (BSA) (#9998) in 100 ml 1X PBS. Store at 4°C.

NOTE: When including fluorescent cellular dyes in your experiment (including viability dyes, DNA dyes, etc.), please refer to the dye product page for the recommended protocol. Visit www.cellsignal.com for a full listing of cellular dyes validated for use in flow cytometry.

B. Fixation

NOTE: Adherent cells or tissue should be dissociated and in single-cell suspension prior to fixation.

NOTE: Optimal centrifugation conditions will vary depending upon cell type and reagent volume. Generally, 150-300g for 1-5 minutes will be sufficient to pellet the cells.

NOTE: If using whole blood, lyse red blood cells and wash by centrifugation prior to fixation.

NOTE: Antibodies targeting CD markers or other extracellular proteins may be added prior to fixation if the epitope is disrupted by formaldehyde and/or methanol. The antibodies will remain bound to the target of interest during the fixation and permeabilization process. However, note that some fluorophores (including PE and APC) are damaged by methanol and thus should not be added prior to permeabilization. Conduct a small-scale experiment if you are unsure.

  1. Pellet cells by centrifugation and remove supernatant.
  2. Resuspend cells in approximately 100 µl 4% formaldehyde per 1 million cells. Mix well to dissociate pellet and prevent cross-linking of individual cells.
  3. Fix for 15 min at room temperature (20-25°C).
  4. Wash by centrifugation with excess 1X PBS. Discard supernatant in appropriate waste container. Resuspend cells in 0.5-1 ml 1X PBS. Proceed to Permeabilization step.
    1. Alternatively, cells may be stored overnight at 4°C in 1X PBS.

C. Permeabilization

  1. Permeabilize cells by adding ice-cold 100% methanol slowly to pre-chilled cells, while gently vortexing, to a final concentration of 90% methanol.
  2. Permeabilize for a minimum of 10 min on ice.
  3. Proceed with immunostaining (Section D) or store cells at -20°C in 90% methanol.

D. Immunostaining

NOTE: Count cells using a hemocytometer or alternative method.

  1. Aliquot desired number of cells into tubes or wells. (Generally, 5x105 to 1x106 cells per assay.)
  2. Wash cells by centrifugation in excess 1X PBS to remove methanol. Discard supernatant in appropriate waste container. Repeat if necessary.
  3. Resuspend cells in 100 µl of diluted primary antibody, prepared in Antibody Dilution Buffer at a recommended dilution or as determined via titration.
  4. Incubate for 1 hr at room temperature. Protect from light.
  5. Wash by centrifugation in Antibody Dilution Buffer or 1X PBS. Discard supernatant. Repeat.
  6. Resuspend cells in 200-500 µl of 1X PBS and analyze on flow cytometer.

posted July 2009

revised June 2020

实验步骤编号:407

特异性/灵敏度

CD68 (D4B9C) XP® Rabbit mAb (Alexa Fluor® 488 Conjugate) 可检测 CD68 总蛋白的内源水平。

物种反应性:

来源/纯化

通过采用重组人 CD68 蛋白对动物进行免疫接种来产生单克隆抗体。

背景

CD68 (巨噬唾液酸蛋白)是由单核细胞和巨噬细胞表达并且常用作其标志物的重度糖基化的跨膜蛋白 (1,2)。它存在于质膜以及内体膜和溶酶体膜上 (1-3)。据称它结合 OxLDL 并且已被观察为同型二聚体形式 (3,4)。

有限使用

除非如以 CST 合法授权代表签署的书面形式另行明确同意,否则以下条款适用于 CST、其附属公司或其分销商提供的产品。除非 CST 合法授权代表以书面形式单独接受,否则任何附加于或异于此处所载条款和条件的客户条款和条件均被拒绝且无效。

产品用“仅供研究使用”或类似标示声明标示,并且尚未经 FDA 或其他国外或国内监管实体出于任何目的批准、准许或许可。客户不得出于任何诊断或治疗目的或以任何与产品标示声明相冲突的方式使用任何产品。CST 销售或许可的产品提供给作为最终用户的客户,且仅用于研究和开发用途。出于诊断、预防或治疗目的任何产品使用或出于转售(单独或作为成分)或其他商业目的的任何产品购买都要求来自 CST 的单独许可。客户 (a) 不得向任何第三方出售、许可、出借、捐赠或另行转让或提供任何本公司产品,无论单独或联合其他材料方式,或使用本公司产品制造任何商业产品,(b) 不得复制、修改、逆向工程、反编译、反汇编或另行尝试发现本公司产品的底层结构或技术,或出于开发与 CST 产品或服务竞争的任何产品或服务的目的使用本公司产品,(c) 不得从本公司产品改变或移除任何商标、商品名称、徽标、专利或版权声明或标记,(d) 仅应根据 CST 产品销售条款和任何适用文档使用本公司产品,以及 (e) 应就客户联系本公司产品所用的任何第三方产品或服务而言遵守任何许可、服务条款或类似协议。

仅供研究使用。不得用于诊断流程。
Cell Signaling Technology 是 Cell Signaling Technology, Inc. 的商标。
Alexa Fluor 是 Life Technologies 公司的注册商标。
本产品依据源于 Life Technologies Corporation 的知识产权许可提供。本产品的转让条件为买方仅在买方开展的研究中使用所购买的产品,不包括合同研究或任何服务收费研究,并且买方不得 (1) 将本产品或其组分用于以下方面:(a) 用于诊断、诊疗或预防目的;(b) 用于检测、分析或筛选服务或获得信息,以按检测收取报酬;或 (c) 用于制造或质量保证或质量控制,和/或 (2) 销售或转让本产品或其组分用于转售,无论是否转售供研究使用。如需了解有关购买本品用于除上述目的之外目的的许可信息,请联系 Life Technologies Corporation(地址:5791Van Allen Way, Carlsbad, CA 92008 USA)或 [受保护的电子邮件]
所有其他商标均属各自所有者专有。访问我们的商标信息页面。